Zum Aktivieren der neuen Einstellungen speichern Sie die Konfiguration und führen einen Neustart der Kamera durch!The Setup of UMTS/3G Modem dialog contains the parameters for configuring Internet connections via UMTS/3G devices.
The SMS Profiles dialog contains the profiles for sending alarm SMS messages.
The Camera Remote Control via SMS dialog allows configuring the camera when receiving specific commands via SMS.
Note: These features are not available for all camera models.
The Setup of UMTS/3G Modem dialog contains the parameters for configuring Internet connections via UMTS/3G devices.
The Activate selection box allows specifying if and how the modem should establish an Internet connection:
Note: If the modem had been deactivated up to this point, you will need to reboot the camera after activating the UMTS/3G modem.
| Parameter | Description |
|---|---|
| Enabled | Enter the number of the phone that is allowed to send SMS messages with commands to the UMTS/3G modem. |
| PIN | Enter the four-digit PIN required for unlocking the modem's USIM. | Phone number | Enter the dial-up number of the mobile network provider. |
| APN | Enter the name of the UMTS/3G access point. |
| Account | Enter the access data (user name and password) assigned by the mobile network provider. |
Note: Please note that changes to the configuration are only stored temporarily in the camera's active configuration. In order to store the changes permanently, you should always store the settings in the camera's permanent memory (see Storing the Configuration).
The SMS Profiles dialog contains the profiles for sending alarm SMS messages.
| Parameter | Description |
|---|---|
| Phone number | Enter the phone number to which the camera sends the alarm SMS. |
| SMS Text | Enter the text of the SMS in this field. |
Note: Please note that changes to the configuration are only stored temporarily in the camera's active configuration. In order to store the changes permanently, you should always store the settings in the camera's permanent memory (see Storing the Configuration).
The Camera Remote Control via SMS dialog allows setting the SMS commands for remotely controlling the camera. The SMS Reception main switch allows activating/deactivating the reception of SMS messages:
Note: In order to activate the reception of SMS messages and the remote control feature, set SMS Reception to Enabled and click on the Set button at the bottom of the dialog. Note that an existing Internet connection will be closed.
You can execute the following remote commands using the parameters in the table below:
| Parameter | Description |
|---|---|
| Phone number | Enter the number of the phone that is allowed to send SMS messages with commands to the UMTS/3G modem. |
| ip-message | Enter the command or code word that needs to be in the SMS. If this is the case, the camera executes the corresponding command. |
| Enabled | Use this checkbox to activate/deactivate the commands that are available:
If the SMS Reception main switch is disabled, the camera will not accept any SMS messages, even if the Enabled checkbox of the corresponding command has been enabled. |
| Acknowledge | If this checkbox is activated, the camera sends an acknowledgement SMS to the phone that sent the command SMS. |
Note: Please note that changes to the configuration are only stored temporarily in the camera's active configuration. In order to store the changes permanently, you should always store the settings in the camera's permanent memory (see Storing the Configuration).
Klicken Sie auf Setzen, um die Einstellungen zu aktivieren und bis zum nächsten Neustart der Kamera zu sichern.
Klicken Sie auf Voreinstellung, um diesen Dialog auf die werkseitigen Voreinstellungen zurückzusetzen (dieser Button wird nicht in allen Dialogen angezeigt).
Klicken Sie auf Zurückholen, um alle Änderungen seit dem letzten permanenten Speichern der Konfiguration zu verwerfen.
Beenden Sie den Dialog durch Klick auf Schließen. Hierbei wird geprüft, ob Änderungen der Gesamtkonfiguration vorliegen. Ist dies der Fall, werden Sie gefragt, ob die Gesamtkonfiguration dauerhaft gesichert werden soll.
Zum Aktivieren der neuen Einstellungen speichern Sie die Konfiguration und führen einen Neustart der Kamera durch!
| cn, de, en, es, fr, it, jp |